Baker & Finnemore Ltd Starlock Fasteners
Baker & Finnemore Limited 199 Newhall Street, Birmingham, B3 1SN, United Kingdom T: +44 (0)121 236 2347 F: +44 (0)121 236 7224 © Copyright 2011 Baker and Finnemore Limited
Starlock® is a registered trademark of Baker and Finnemore Limited Registered in England number 116591 Quality management systems complies with the internationally recognised standards, ISO/TS 16949:2009, EN 9100:2009 and ISO 9001:2008
bakfin-titgemeyer-home bakfin-titgemeyer-products bakfin-titgemeyer-downloads bakfin-titgemeyer-contact bakfin-titgemeyer-history bakfin-titgemeyer-group
Starlock Push-On Fasteners for a Metric Round Shaft Standard Range: Non standards available on request
bakfin-starlock-metric-range
Starlock Push-On Fasteners for a Imperial Round Shaft Standard Range : Non standards available on request
bakfin-starlock-imperial-range
All dimensions shown are subject to engineering tolerances. Starlocks® are generally available in spring steel and many are also supplied in stainless steel. Non-standard parts may be subject to a minimum order quantity. Uncapped Starlocks® are available in spring steel with the following finishes: Blue and Hydroclear finish for inch HC sizes Bronze and Hydroclear finish for metric HC sizes Mechanical zinc plated for DT finish Electro Zinc Plated AT Range
starlock-hydroclear-push-on-fastener starlock-mechanical-zinc-plated-push-on-fastener starlock-stainless-steel-push-on-fastener
Starlock Hydroclear Push On Fastener
Starlock Mechanical Zinc Plated Push On Fastener
Starlock Stainless Steel Push On Fastener
bakfin-electro-zinc-starlock
Starlock Mechanical Electro Zinc Plated Push On Fastener
Starlock Push On Fasteners they just push on
starlock-they-just-push-on gto-bakfin-starlock-push-ons bakfin-they-just-push-on bakfin-gto-capped-starlocks-push-ons
Starlock Push On Fasteners   “The original Starlock Push on Fasteners make up the standard range, from 1.5mm up to 25mm, and imperial 1/16” up to 1”. Baker & Finnemore offer the most extensive and diverse range of Starlock Push on Fasteners in Europe, all manufactured in accordance with the strictest quality control procedures. Accredited to automotive (TS 16949) and aerospace (AS9100) standards, you can be sure that your application will be road or flight safe!”
Baker & Finnemore Ltd ©
Starlock® Push-On Fasteners from Baker and Finnemore Ltd BAKFIN   Baker and Finnemore are the globally recognised manufacturer and major stockholder of Starlock® push on fasteners. The Starlock® push on fasteners are designed and manufactured using the finest quality materials, with over 150 years of experience and expertise in pressed components. They are specially heat treated, cleaned and finished on site to ensure each and every one of the 500 million Starlocks® sold annually can achieve and beat all performance expectations. Starlock® fasteners simply push on to the shaft to give an instant fix and grip, thus eliminating costly threading and grooving operations. Once fixed in position, the Starlock® push-on fasteners are so secure that they cannot be removed without destruction. The majority of our Starlocks push-on fastener range can be supplied assembled with a cap to conceal the fixing and enhancing the appearance. A variety of cap styles and materials are available. Our extensive range of Starlock® tooling means that we can offer options on customised Starlock designs quickly and competitively.
Starlock® Push on Fasteners are available with or without a decorative cap. The caps hide the end of the axle and the Starlock® push on fastener when assembled to provide a cosmetic appearance. The standard dome and standard deep axle caps are manufactured from stainless steel. The extra deep axle cap is manufacture from steel and electro zinc plated. The caps can be made from other metals, dependent on material specification and volume required. Choice of Cap styles Captivated Starlock® push on fasteners are available in three distinct styles: Dome Axle Cap, Deep Axle Cap and Extra Deep Axle Cap. Special Starlock® Capped & Uncapped (Axle Caps, Dome Caps, Deep Axle Caps). To suit non standard shaft sizes / shapes. (Rectangular, Square, Triangular, etc). Sample development service. Alternative materials & finishes.
bakfin-capped-starlocks
Baker & Finnemore Limited 199 Newhall Street, Birmingham, B3 1SN, United Kingdom T: +44 (0)121 236 2347 F: +44 (0)121 236 7224 © Copyright 2011 Baker and Finnemore Limited
Starlock® is a registered trademark of Baker and Finnemore Limited Registered in England number 116591 Quality management systems complies with the internationally recognised standards, ISO/TS 16949:2009, EN 9100:2009 and ISO 9001:2008
Baker & Finnemore Ltd Starlock Fasteners
bakfin-titgemeyer-home bakfin-titgemeyer-products bakfin-titgemeyer-downloads bakfin-titgemeyer-contact bakfin-titgemeyer-history bakfin-titgemeyer-group
Starlock Push-On Fasteners for a Metric Round Shaft Standard Range: Non standards available on request
bakfin-starlock-metric-range
Starlock Push-On Fasteners for a Imperial Round Shaft Standard Range : Non standards available on request
bakfin-starlock-imperial-range
All dimensions shown are subject to engineering tolerances. Starlocks® are generally available in spring steel and many are also supplied in stainless steel. Non-standard parts may be subject to a minimum order quantity. Uncapped Starlocks® are available in spring steel with the following finishes: Blue and Hydroclear finish for inch HC sizes Bronze and Hydroclear finish for metric HC sizes Mechanical zinc plated for DT finish Electro Zinc Plated AT Range
starlock-hydroclear-push-on-fastener starlock-mechanical-zinc-plated-push-on-fastener starlock-stainless-steel-push-on-fastener
Starlock Hydroclear Push On Fastener
Starlock Mechanical Zinc Plated Push On Fastener
Starlock Stainless Steel Push On Fastener
bakfin-electro-zinc-starlock
Starlock Mechanical Electro Zinc Plated Push On Fastener
Starlock Push On Fasteners they just push on
starlock-they-just-push-on
Starlock Push On Fasteners   “The original Starlock Push on Fasteners make up the standard range, from 1.5mm up to 25mm, and imperial 1/16” up to 1”. Baker & Finnemore offer the most extensive and diverse range of Starlock Push on Fasteners in Europe, all manufactured in accordance with the strictest quality control procedures. Accredited to automotive (TS 16949) and aerospace (AS9100) standards, you can be sure that your application will be road or flight safe!”
Baker & Finnemore Ltd ©
Starlock® Push-On Fasteners from Baker and Finnemore Ltd BAKFIN   Baker and Finnemore are the globally recognised manufacturer and major stockholder of Starlock® push on fasteners. The Starlock® push on fasteners are designed and manufactured using the finest quality materials, with over 150 years of experience and expertise in pressed components. They are specially heat treated, cleaned and finished on site to ensure each and every one of the 500 million Starlocks® sold annually can achieve and beat all performance expectations. Starlock® fasteners simply push on to the shaft to give an instant fix and grip, thus eliminating costly threading and grooving operations. Once fixed in position, the Starlock® push-on fasteners are so secure that they cannot be removed without destruction. The majority of our Starlocks push-on fastener range can be supplied assembled with a cap to conceal the fixing and enhancing the appearance. A variety of cap styles and materials are available. Our extensive range of Starlock® tooling means that we can offer options on customised Starlock designs quickly and competitively.
Choice of Cap styles Captivated Starlock® push on fasteners are available in three distinct styles: Dome Axle Cap, Deep Axle Cap and Extra Deep Axle Cap. Special Starlock® Capped & Uncapped (Axle Caps, Dome Caps, Deep Axle Caps). To suit non standard shaft sizes / shapes. (Rectangular, Square, Triangular, etc). Sample development service. Alternative materials & finishes.
bakfin-capped-starlocks
Starlock® Push on Fasteners are available with or without a decorative cap. The caps hide the end of the axle and the Starlock® push on fastener when assembled to provide a cosmetic appearance. The standard dome and standard deep axle caps are manufactured from stainless steel. The extra deep axle cap is manufacture from steel and electro zinc plated. The caps can be made from other metals, dependent on material specification and volume required.